Tips From the Moving Company Pros: Ways To Move a Pinball Device



With pinball making a big renewal across the nation, Mild Giant wishes to ensure that these timeless, beautiful devices remain damage-free while being carried. Oh, and we want individuals moving them to be safe, too.

Initially glance, pinball devices can appear frightening to move due to the fact that of their weight, size, and fragility. Luckily, our skilled Giants have a few techniques up their sleeves to guarantee your pinball is moved with ease.
Folding Down the Headbox

The majority of modern pinballs (made in the last Twenty Years approximately) have a hinge system which allows the headbox to be folded down. Early pinball machines had their headboxes bolted on, utilizing either 2 or four bolts. All Electro-Mechanical pinballs use this system, together with the early Strong State makers.

Later devices have hinges and utilize a locking system to keep the headbox upright. There may also be two bolts inside as included security, in case the latch is broken or unintentionally un-latched.
Electro-Mechanical Pinballs

For Electro-Mechanical pinball devices, you require to remove the headbox rear access panel to acquire access to the bolts and plugs within. Generally this panel has a lock on it to keep it in place, but gradually the secret might have been lost. On a regular basis, there is a screw keeping this panel in place.

When within, remove the bolts and unplug the large ports that have circuitry decreasing into the machine. You may wish to identify these adapters to put them back in the right spot, but they must be various sizes, making it hard to plug back incorrectly.

You can now remove the headbox totally, or fold the headbox down onto the playfield glass. Make certain you utilize some foam, heavy cardboard, or blankets to protect the headbox from rubbing on the cabinet. Foam is best, as it will help keep the back glass in place.
Early Solid State Pinballs

For early Strong State Pinballs, you will have to get rid of the back glass. There is a lock situated on the headbox in one of 3 locations: the left-hand side at the top, right-hand side at the top or on top of the headbox in the.

When opened, eliminate the back glass by raising it up utilizing the lift channel (at the bottom of the glass), and then pull it out from the bottom.

Then, open up the back box lamp panel by lifting the lock situated on either the left-hand side or right-hand side. The panel can now swing out towards you, and provide you access to the circuit boards, plugs, and the bolts. Some Gottlieb pinballs require you to raise up the light panel in order to swing it open.

Now that you are within, you can get rid of the bolts, and any plugs that have wires going down into the machine. You may want to label these plugs to put them back in the best area. You might not have to get rid of the plugs, as the wiring should be long enough to allow the headbox to be folded down.

At this point, you can lock up the light panel and change the back glass.
Modern Strong State Pinballs

For Data East, Sega, and Stern Modern pinballs, there is a turnable lock system situated at the back of the headbox. Utilizing the supplied key, turn the latch 90 ° counter-clockwise.

For Williams, Bally, and Gottlieb, you can easily unlatch the back box at the back of the machine. This is an easy setup and requires no tools.

You're done if you can now fold down the head box onto the cabinet. Make certain you utilize some foam, heavy cardboard, or blankets to secure the headbox useful reference from rubbing on the cabinet. Foam is best, as it will likewise assist keep the back glass in place.

You need to get inside if you can not fold the head box down. There is a lock located at the top of the back glass in the center. Utilize the provided secret to unlock, and get rid of the back glass by raising it up from the click to read more bottom, then pulling it out from the bottom.

Next, you will need to eliminate the screen panel. (Some newer Williams and Bally pinballs do not have a separate amp panel, it is part of the back glass panel. And later Sega and Stern pinballs use a fluorescent tube for the back glass lighting).

Eliminate the two bolts, put the back box back together, and fold down the head box onto the cabinet. Ensure you utilize some foam, heavy cardboard, or blankets to safeguard the headbox from rubbing on the cabinet. Foam is best, as it will likewise assist keep the back glass in location.
Eliminating the Legs.

Pinball Device legs are held in location by eight bolts. The contemporary pinballs have captive nuts or threaded plates inside for the bolts to screw into.

These captive nuts and threaded plates can be damaged, and the use of extra nuts may have been required. If this is the case, you will need to open the front door of the pinball, slide out the playfield glass, and raise up the playfield.

With the front door (coin door) open, move the lock down bar lock throughout and get rid of the lock down bar. Move out the playfield glass, and put in a safe location. Next, raise the playfield by putting your hand where the ball drains pipes, and lift the playfield up.

You ought to now have access to any nuts that may have been used. Once any nuts have been removed, replace the playfield glass and lock down bar, and lock the front door.

Be sure to mark or keep in mind which legs are for the front and back, as they will be changed in a different way to match.
Packing the Pinball.

You are now prepared to transfer your pinball device. Before you load it, ensure you eliminate the pinballs so they don't bounce around during transport.

It might be simpler to eliminate the legs just prior to packing the machine if you are moving the pinball using a van or SUV. Grab a good friend to assist and have among you supporting the pinball, while the other eliminates the front legs. Slide the device in, then get rid of the back legs. It is much easier to load the machine front.

Ensure you strap the pinball in, as you do not want it moving if you have to stop suddenly!

For Electro-Mechanical pinball machines, you require to get rid of the headbox rear gain access to panel to acquire access to the bolts and plugs inside. (Some newer Williams and Bally pinballs do not have a separate amp panel, it is part of the back glass panel. And later on Sega and Stern pinballs utilize a fluorescent tube for the back glass lighting).

If you are moving the pinball utilizing a van or SUV, it may be easier to remove the legs simply prior to filling the device. Grab a buddy to help and have one of you supporting the pinball, while the other gets rid of the front legs.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Comments on “Tips From the Moving Company Pros: Ways To Move a Pinball Device”

Leave a Reply

Gravatar